8553036
Descripción
Test por Jesse Clark, actualizado hace más de 1 año
|
Creado por Jesse Clark
hace más de 7 años
|
|
Pregunta 1
Pregunta
What is the device used to link different frequencies together at a specific location?
Respuesta
-
Gateway
-
Transponder
-
Relay
-
Resonator
Pregunta 2
Pregunta
Which radio frequency band operates on 150 MHz to 174 MHz?
Respuesta
-
Ultra high frequency
-
Low frequency - low band
-
Very high frequency - low band
-
Very high frequency - high band
Pregunta 3
Pregunta
What does NFIRS offer as a benefit to firefighters?
Respuesta
-
Determining trends in firefighter casualties
-
Reporting arsonists country wide
-
Reporting number of firefighters used on an incident scene
-
Determining the number of firefighters to use on an incident scene
Pregunta 4
Pregunta
What is one of the most extensive reports completed by a fire department after a major incident which resulted death(s) or major property damage?
Respuesta
-
After-action report
-
Post-action report
-
After-response report
-
Post-fire report
Pregunta 5
Pregunta
Which fire alarm reporting system is used in commercial buildings, multifamily dwellings, and private homes and could consist of smoke detectors, manual pull boxes, and water flow alarms?
Respuesta
-
Private fire alarm
-
Public answering point
-
Still alarm
-
Municipal fire alarm
Pregunta 6
Pregunta
Which of the following alarm reporting systems originated in the 1800s in widely urbanized areas?
Respuesta
-
Municipal fire alarm
-
Private fire alarm
-
Land-line
-
Still alarm
Pregunta 7
Pregunta
Which of the following is an improvement to 9-1-1?
Respuesta
-
PSAP
-
PAPR
-
RAPP
-
APRS
Pregunta 8
Pregunta
Per SOP 205.01, a progress report includes:
Respuesta
-
Position (location), Progress, needs.
-
Position (location), Progress, Accountability.
-
Position (location), Assignment, Progress
-
Assignment, Progress, Accountability.
Pregunta 9
Pregunta
Documenting the event is part of the communications process.
Respuesta
- True
- False
Pregunta 10
Pregunta
The preferred method of communications on a radio system is ________________.
Respuesta
-
Plain language or clear text
-
Plain English
-
Ten-codes
-
Fire service jargon
Pregunta 11
Pregunta
What items must be communicated initially when transmitting a Mayday (prior to acknowledgement from Command)?
Respuesta
-
Mayday, Identifier, Location.
-
Mayday, Identifier, Situation, Location.
-
Mayday, Identifier, Situation, Location, Plan.
-
Mayday, Identifier, Situation.
Pregunta 12
Pregunta
What term is used to clear all non-essential communications on the fireground for urgent communications?
Respuesta
-
Emergency Traffic
-
Mayday
-
Tone alert
-
Shut up so I can talk
Pregunta 13
Pregunta
What term is used to have fire personnel evacuate a structure in rapid retreat, utilizing the closest egress without tools and equipment (except hand tools)?
Respuesta
-
Abandon
-
Evacuate
-
Withdraw
-
Emergency Traffic
-
Run for your lives
Pregunta 14
Pregunta
Which term is used on an emergency scene and indicates that you are ready for a new assignment?
Respuesta
-
Available
-
In service
-
Task complete
-
Good to go
Pregunta 15
Pregunta
The ability of emergency responders to work seamlessly with other systems or products without any special effort is the definition of ______________.
Respuesta
-
Interoperability
-
Cross training
-
Automation
-
Integration
Pregunta 16
Pregunta
What are the two functions of radios?
Respuesta
-
Transmit and receive
-
Code and encode
-
Relay and receive
-
Passive and active
Pregunta 17
Pregunta
What are the two types of technology for the method of transmitting the conversation through signals over the airwaves?
Respuesta
-
Analog and digital
-
Active and Passive
-
UHF and VHF
-
MHz and GHz
Pregunta 18
Pregunta
What determines the number of units dispatched to an incident?
Respuesta
-
Departmental policy
-
Dispatcher
-
Manpower available
-
Units available
Pregunta 19
Pregunta
What does the acronym NFIRS refer to?
Respuesta
-
National Fire Incident Reporting System
-
National Firefighters Improved Response System
-
National Firefighter Incident Response System
-
National Firefighting Integrated Reporting System
Pregunta 20
Pregunta
What is the primary purpose of the public fire service communication system?
Respuesta
-
Receive report of emergency and dispatch units
-
Announce vehicle as being in service
-
Announce vehicle as being out of service
-
Receive telephone calls
Pregunta 21
Pregunta
What is the term for an item used to describe the physical location of an alarm box and the apparatus or resources assigned to respond?
Respuesta
-
Box card
-
Apparatus card
-
Response card
-
Trip card
Pregunta 22
Pregunta
What technology can be used to receive transmissions from field units and rebroadcast them at a higher power?
Respuesta
-
Repeater
-
Transceiver
-
Booster
-
Transponder
Pregunta 23
Pregunta
What type of system utilizes a computer to assist in dispatching units?
Respuesta
-
Computer aided dispatch
-
Computerized run card
-
Computerized box card
-
Computer based dispatch
Pregunta 24
Pregunta
Which radio frequency band is becoming available to public safety entities as television stations move to other frequencies?
Respuesta
-
700 MHz
-
600 MHz
-
300 MHz
-
200 MHz
Pregunta 25
Pregunta
Which radio system does the user select a talk group and the system automatically selects the channel to be used?
Respuesta
-
Trunked
-
Active
-
Conventional
-
Passive
Pregunta 26
Pregunta
Which radio system does the user select the channel to communicate?
Respuesta
-
Conventional
-
Active
-
Trunked
-
Passive
Pregunta 27
Pregunta
Which type of channel set-up is one frequency used for transmitting and a second frequency is used for receiving?
Respuesta
-
Duplex
-
Coded
-
Simplex
-
Multiplex
Pregunta 28
Pregunta
Which type of channel set-up is one frequency used for both transmitting and receiving signals?
Respuesta
-
Simplex
-
Coded
-
Duplex
-
Multiplex
Pregunta 29
Pregunta
Which radio frequency band operates on 33 MHz to 46 MHz?
Respuesta
-
Very high frequency - low band
-
Low frequency - low band
-
Very high frequency - high band
-
Ultra-high frequency
Pregunta 30
Pregunta
Which radio frequency band operates on 450 MHz to 460 MHz?
Respuesta
-
Ultra high frequency
-
Low frequency - low band
-
Very high frequency - low band
-
Very high frequency - high band
Pregunta 31
Pregunta
A "live saw" means that the saw is_________.
Respuesta
-
Running
-
Turned on but not started
-
In service on the apparatus
-
In the hands of a firefighter
Pregunta 32
Pregunta
A multipurpose fire service specific tool made from a single piece of forged steel is called ________________?
Respuesta
-
Halligan Bar
-
Hooligan Bar
-
Huxbar
-
Hoober bar
Pregunta 33
Pregunta
A pickhead axe has how many cutting bits?
Respuesta
-
One
-
Two
-
Three
-
Four
Pregunta 34
Pregunta
A reciprocating saw blade that is labeled bimetal means that it can cut ____________.
Respuesta
-
A - Wood
-
B - Metal
-
Both a and b
-
Neither a or b
Pregunta 35
Pregunta
Allow ________________ to do the work when using an axe.
Respuesta
-
The weight of the axe
-
Your body weight
-
Your back and shoulders
-
Inertia and gravity
Pregunta 36
Pregunta
An important rule to remember when using a power saw is to cut as deep as the blade can possibly cut, as it will have no effect on any structural members.
Respuesta
- True
- False
Pregunta 37
Pregunta
At a minimum ________________ should be used at all times when working with hand tools.
Respuesta
-
Eye protection
-
Helmets
-
Gloves
-
Turnout gear
Pregunta 38
Pregunta
By watching the discharge from the chainsaw, a firefighter can determine the condition of the chain. If the chain is _________, then the firefighter will see dust and will have to apply a lot of pressure to make the cut.
Respuesta
-
Dull
-
Sharp
-
Bent
-
Missing teeth
Pregunta 39
Pregunta
Common terms for a _____________ saw are cutoff saw, demolition saw, or rescue saw.
Respuesta
-
Rotary
-
Chain
-
Reciprocating
-
None of these
Pregunta 40
Pregunta
Cutting with an axe is as much ________________ as it is strength.
Respuesta
-
Hand-eye coordination
-
Control and command
-
Stability and swing
-
Precision and accuracy
Pregunta 41
Pregunta
Cutting, striking, pushing, pulling, and prying are all examples of ________________?
Respuesta
-
Various tasks tools can accomplish on the fire ground.
-
types of tools used on the fire ground.
-
Methods tools use to accomplish work on the fire ground.
-
Methods and ways tools are used on the fire ground.
Pregunta 42
Pregunta
Effectively used, tools become ________________ of/to a firefighter’s body.
Respuesta
-
Extensions
-
Adjuncts
-
Multipliers
-
Hindrances
Pregunta 43
Pregunta
Match the following common nonverbal signal used by firefighters with its appropriate meaning: Stop the cut
Respuesta
-
1 tap
-
2 taps
-
3 taps
Pregunta 44
Pregunta
Match the following common nonverbal signal used by firefighters with its appropriate meaning: Cut
Respuesta
-
2 taps
-
1 tap
-
3 taps
Pregunta 45
Pregunta
Match the following common nonverbal signal used by firefighters with its appropriate meaning: Shut down the saw
Respuesta
-
3 taps
-
1 tap
-
2 taps
Pregunta 46
Pregunta
Match the following type of rotary saw blade with the appropriate materials to be cut by it: Aluminum oxide abrasive blades (discs)
Respuesta
-
Heavy gauge metals
-
Steel, concrete, and wood
-
Concrete, brick, mortar, etc.
-
Lexan, Plexiglas, light gauge metal
Pregunta 47
Pregunta
Match the following type of rotary saw blade with the appropriate materials to be cut by it: Diamond grit blade
Respuesta
-
Steel, concrete, and wood
-
Heavy gauge metals
-
Concrete, brick, mortar, etc.
-
Lexan, Plexiglas, light gauge metal
Pregunta 48
Pregunta
Match the following type of rotary saw blade with the appropriate materials to be cut by it: Silicon carbide blade
Respuesta
-
Concrete, brick, mortar, etc.
-
Heavy gauge metals
-
Steel, concrete and wood
-
Lexan, Plexiglas, light gauge metal
Pregunta 49
Pregunta
Match the following type of rotary saw blade with the appropriate materials to be cut by it: Carbine tip blades
Respuesta
-
Lexan, Plexiglass, light gauge metal
-
Heavy gauge metals
-
Steel, concrete, and wood
-
Concrete, brick, mortar, etc.
Pregunta 50
Pregunta
Most rotary saws and chain saws operate with a ____________ engine.
Respuesta
-
Two-cycle
-
Four-cycle
-
Electrical
-
Diesel
Pregunta 51
Pregunta
Not all bolt cutters can cut ________________.
Respuesta
-
Case-hardened steel
-
Chain link fence
-
Small cables
-
Tree limbs
Pregunta 52
Pregunta
Once a reciprocating saw is used, a new blade should be placed in the saw to make it ready for the next emergency, no matter what condition it is in.
Respuesta
- True
- False
Pregunta 53
Pregunta
Reciprocating saws are generally used by firefighters for ______________.
Respuesta
-
A and B only
-
A - structural collapse
-
B - Vehicle and machinery extrications
-
C - Ventilation
-
All of these
Pregunta 54
Pregunta
Saw maintenance is best achieved by following the manufacturer's instructions.
Respuesta
- True
- False
Pregunta 55
Pregunta
Spreading your feet will help to ________________.
Respuesta
-
Center your body weight
-
Distribute the power of your swing
-
Determine the depth of the cuts
-
Center the axe on target
Pregunta 56
Pregunta
The ideal weight for a pickhead axe is ________________?
Respuesta
-
8 pounds
-
6 pounds
-
7 pounds
-
9 pounds
Pregunta 57
Pregunta
The key to using an axe effectively is ________________.
Respuesta
-
Accuracy
-
Timing
-
Precision
-
Strength
Pregunta 58
Pregunta
The most important safety factor a saw operator must observe after cutting with a rotary saw is_____________.
Respuesta
-
Stop the blade from rotating
-
Shut the engine off
-
Refuel the saw
-
Clean the air intake fins
Pregunta 59
Pregunta
The primary role of the axe is to ________________.
Respuesta
-
Cut
-
Strike
-
Push
-
Pull
Pregunta 60
Pregunta
The recommended minimum distance that firefighters should maintain between themselves and another firefighter operating a saw is ________________________.
Respuesta
-
10 feet
-
5 feet
-
6 feet
-
15 feet
Pregunta 61
Pregunta
The simple saw starting method developed by Lieutenant Michael Ciampo (FDNY) is safer because it allows the firefighter to lift the saw using his legs and back muscles together, reducing the chance of an injury.
Respuesta
- True
- False
Pregunta 62
Pregunta
Using a chain saw to cut a ventilation hole in a roof is the same as using a chain saw to cut trees.
Respuesta
- True
- False
Pregunta 63
Pregunta
What fire service tool can be used to secure a monitor by driving the tool into the ground and securing the monitor to the tool?
Respuesta
-
Pry bar
-
Flat-head axe
-
Halligan tool
-
Pick-head axe
Pregunta 64
Pregunta
When starting a cold engine on a rotary saw, the best practice is to pull the starter cord as quickly as possible and as far as it will travel.
Respuesta
- True
- False
Pregunta 65
Pregunta
When swinging an axe concentrate on ________________.
Respuesta
-
Accuracy
-
Force
-
Precision
-
Depth
Pregunta 66
Pregunta
When using a chain saw to cut a ventilation hole, a firefighter should use the ___________ of the chain.
Respuesta
-
Tip
-
Back
-
Front
Pregunta 67
Pregunta
When using a chain saw to ventilate a roof, you should______________.
Respuesta
-
All of these
-
Bring the saw to full RPMs before you plunge into the material
-
Plunge the saw only a few inches into the material
-
Hold the saw in an almost vertical position.
¿Quieres crear tus propios Tests gratis con GoConqr? Más información.