Criado por elisa barrios
aproximadamente 11 anos atrás
|
||
Questão | Responda |
The fire service uses an organizational structure based on rank | True |
Staff personnel deliver emergency services directly to external customers | False |
Guide to decision making in an organization | Policy |
Set of principles developed through consensus | Standard |
Detailed plan of step-by step action for conducting policy | Procedure |
Collection of rules enacted by law in a particular jurisdiction | Code |
Which of the following fire services trends of change means that fire departments must provide some type of first responder care? | Emergency Medical Services |
Which cultural strength within the fire service means a firefighter's behavior should involve right or just behavior with an emphasis on trust? | Moral Character |
Many fire departments take the ______ approach by providing a variety of services to their communities? | All Hazards |
The layers in the fire service organizational pyramid are composed of what | Personnel assigned by rank and duty |
What is the primary duty of firefighter 1 level personnel? | Perform assigned tasks under supervision of a firefighter 2 or a company officer |
Which position in the fire service is responsible for supervising a fire company? | Fire Department Officer |
What is the first step to locating information in your departments regulations? | Ask your supervisor |
Which of the following organizations that interact with the fire service can be helpful in alerting the public in large-scale evacuations? | Media |
The risk management model developed by the Pheonix (AZ) fire department is focused on behaviors that support a safety first mindset | True |
Effective safety and health programs depend only on participation from department administrators | False |
Firefighters should never stand on or in a moving apparatus, no exceptions | False |
One way to help minimize risk at an emergency is to work individually as each firefighter sees fit. | False |
Which of the following is an individuals responsibility in the prevention of respiratory diseases? | Wear appropriate level of respiratory protection. |
Which of the following is the most comprehensive standard relating to fire fighter safety and health? | NFPA 1500 |
Occupational safety and health administration (OSHA) regulations relate to | federal and private sector employees who fight fires |
Which of the following typically causes back injuries and strains associated with fire stations and facilities? | Improper lifting |
Which of the following is the best way to practice safety with tools and equipment? | Select appropriate tool for the job |
When is a collapse zone established? | When a defensive strategy is adopted |
Which of the following personnel accountability systems requires the accountability officer to record an expected exit time? | SCBA tag system |
The public answering point (PSAP) is a category of? | Telecommunication Systems |
What percentage of the US has access to the 911 system? | 96% |
The public information officer (PIO) is the contact person for? | Non emergency or complaint calls |
Which of the following is a responsibility when monitoring a fire stations watch room or booth? | Notifying crew members of telephone calls |
Assigned units should confirm receipt of dispatch information according to local protocol after: | Dispatch Transmission |
internal communications involve transmissions between incident commander and: | units at the emergency scene |
Which of the following best describes the part of a mobile radio system usually located in the cab within reach of the driver/operator | Receiver and a trasmitter |
Most fire departments have a _____ assigned for dispatching | Channel |
Which of the following best describes what first happens when a radio is turned on in a trunked radio system? | The system controller is notified |
Which of the following is a feature that sends an alert signal to an agency's dispatch center? | Dynamic Regrouping |
Vehicle engines, electric motors, and computers all fall into which category of radio limitations? | interference |
When using a microphone, good practice is to: | key the microphone and wait a second for a signal to capture an antenna |
Size and moisture content affect how wood reacts to fire | True |
Heated gypsum may crack and shatter when struck by a cold fire stream | False |
Buildings are composed of the same components, all of which can prevent or contribute to fire growth. | True |
Which of the following common building materials performs well under fire conditions but can lose strength through spalling? | Reinforced concrete |
Which of the folloing construction types is considered to be the most collapse resistant | Type 1 |
Atmosphere-supplying respirators (ASRs) only filter particulates out of ambient air | False |
Air-Purifying respirators (APRs) are classified in three categories of filter degradation: N, R and P | True |
SCBA checks should be performed only once a week | False |
The inspection period for protective breathing apparatus is established by NFPA 1852 | True |
Empty SCBA cylinders should be kept with full sylinders | False |
SCBA air supply duration depends only on physical condition | False |
Which of the following types of protective clothing is designed to prevent heat transfer from fire to the body? | Structural Fire Fighting |
Which of the types of special protective clothing may be dual certified for emergency medical use? | Technical Rescue |
Which of the NFPA definied types of cleaning does not require removal from service? | Routine |
Which of the following respiratory hazards is most commonly caused by combustion | Oxygen Deficiency |
Which of the following respiratory hazards targets the heart and the brain? | Hydrogen Cyanide |
Which of the following wearer limitations for respiratory protection requires the user to have the ability to overcome stress and fear? | Psychological limitations |
Which of the following equipment limitations of respiratory protection can result in minor leaks? | Poor condition of apparatus |
Which of the following safety precautions taken when refilling SCBA prevents it from overheating? | Fill cylinder slowly |
Which of the following is a non emergency exit indicator | Necessary to replace air cylinder |
Which of the following is an emergency exit indicator? | SCBA Failure |
Which of the following non emergency exit techniques requires using the same path to exit an IDLH environment as to enter? | Egress paths |
there is no standard that regulates requirements for life safety rope | False |
Synthetic rope is resistant to mildew, mold and rotting | True |
ONly life safety rope must be inspected after each use? | False |
There are two parts of rope used when tying a knot | False |
Which of the following types of rope construction is used for life safety rope? | Kernmantle rope |
Which of the following BEST describes what could happen id a rope is subjected to a sustained load for more than two days? | Rope may break well below the rated load limit |
What type of webbing is best suited for use as a part of a search line system | Utility Webbing |
A tighter bend in a knot leads to | more strength lost in the knot |
which type of knot is used as a safety measure when tying other knots? | overhand safety |
the load ability of a rope | must exceed weight of object hoisted |
Which of the following is BEST to use when creating a mechanical advantage for hoisting? | Pulley |
Fire fighters use knowledge of building floor plan to conduct effective structural searches | True |
Ultimate responsibility for size-up rests with the first arriving officer on-scene? | False |
If there is a possibility of extreme fire behavior, a Fire fighter should not attempt entry until coordinated fire control and ventilation is implemented | True |
To exit a building, turn in the same direction you entered a room | False |
Before entryinto an immediately dangerous to life and health area, fire fighters should be aware of alternate means of egress | True |
During the primary search, firefighters check both known and likely locations of victims and fire conditions | True |
Most occupants will need assistance when evacuating a structure | False |
Escape is the best option when a firefighter has completely exhausted air supply? | True |
After a MAYDAY transmission, the rescue intervention team (RIC) should first gather needed equipment | False |
After locating the downed firefighter, the first priority of the RIC team is usually stabilize injuries | False |
Which of the following situational awareness clues alert firefighters to the possibility a building may be occupied? | Vehicles in the driveway |
Which of the following is the BEST way to perform a quick visual survey of conditions while on the fire floor | Get low to the floor |
Which of the following victim removal methods is common in both hospitals and correctional facilities | Shelter in place |
Which of the following is the most important survival technique for firefighters? | Avoid potential hazards |
Which of the following MAYDAY situations is most common when a structure has been on fire for an extended period of time or while it is under construction? | Collapse/Trapped |
Which of the following survival actions is best used in order to buy more time to escape? | Seek safe haven |
Vehicle mounted generators produce more power than portable units | True |
Fixed lights are used to light remote areas of the incident | False |
Only junction boxes and adapters are required to be waterproof; other auxiliary electrical equipment may not need to be | False |
Which of the following is the most common power source used by emergency services personnel | Electrical generators |
Which of the following best describes the limitations of electrical cables and extension cords? | They should only be used with equipment whose power demands do not exceed capacity. |
Security barriers block escape routes for both fire fighters and occupants | True |
Non traditional types of locks provide a higher level of security | True |
The pumping mechanism for hydraulic prying tools can only be powered | False |
No single forcible entry tool handles all situations | True |
Cutting around a lock is another way to open a resisting door | True |
Interior pocket doors can be forced with the same technique used for sliding doors | False |
The best entry point into a burning building is to force entry through windows. | False |
Interior walls are more difficult to breach than exterior walls | False |
Gates should be pried or cut when forcing entry to cause less damage | False |
Which of the following may have a key pad, card reader, or fingerprint activated screen? | Electronic keyless or digital locks |
which of the following should be done to prevent injury when using a saw? | Maintain situational awareness |
Which of the following is most accurate about the care and maintenance of forcible entry tools? | Report damage to tools according to department procedures |
When performing forcible entry to open a door begin with | minimum damage and proceed to maximum damage |
which of the following is the term used for two boards connected with long carriage bolts? | Strongbacks |
Which of the following makes faster, rougher cuts when breaching a floor? | Chain Saw |
A barbed wired fence should be cut with a (an) | bolt cutter |
To ensure safety, an axe or prying tool should be carried with the blade, pointed or sharp edges ____ from the body | Away |
Carry a pike pole or hook with the tool head ____ to ensure safety when outside a structure | down |
When carrying a striking tool, keep the head of the tool ____ to the ground | close |
To ensure safety, carry a power tool with blade forward and ____ the ground | Toward |
The halyard and pulleys are components of an extension ladder | True |
The ladder tip is secured and the foot anchored only during training, when the ladder may be used for repeated exercises | False |
An easy way to determine the proper distance between the ladder butt and the building is to divide the working length of the ladder by four | True |
To climb a ladder smoothly, the right hand and foot move together then the left hand and foot | False |
Ladders constructed of ____ retain strength when exposed to heat and have better resistance to bouncing when climbed | Wood |
What is the purpose of the ladder positioning label? | Indicate the proper climbing angle. |
Which is the best procedure to follow when an inspection reveals possible deterioration of components | Remove the ladder from service until it can be service tested |
what is the max number of firefighters that can use a ladder without overloading? | one firefighter every 10ft (3m) |
Which of the following best describes means of escape required when personnel are working on a roof or upper story | at least two ladders at remote locations from one another |
to prevent personal injuries, ladders should be lifted and lowered using which group of muscles | Legs |
How many firefighters should be used to raise ladders of 35ft or longer | three |
heeling and tying in are two methods of | preventing the ladder from moving away from the building |
Which of the following can secure a firefighter to the ladder while performing work? | Ladder belt, leg lock |
Which of the following is the best placement for a ladder intended to be used for rescue through a narrow window. | Ladder tip raised to just below sill |
Tactical ventilation should only be performed when the fire attack hoselines and teams are in place and ready to advance toward the fire. | True |
The two general types of tactical ventilation used for structure fires are horizontal and vertical | True |
The triangle cut ventilation hole provides the least reliable information of conditions beneath the roof | False |
A trench cut is used to create a fire break that increases the spread of fire in a common attic structures or large structures | False |
Restoring the HVAC system to operation after a fire is the responsibility of the building engineer or maintenance superintendent | True |
Smoke control systems usually have a system diagram in the same location as the control panel, indicating where the alarm originated | True |
Air flow is the movement of air toward burning fuel and | movement of smoke out of the compartment |
For vertical ventilation to be effective, a horizontal inlet opening at or below the level of the fire is needed to provide a flow path for: | for fresh air to enter the structure |
mechanical ventilation methods using fans, blowers, and smoke ejectors can be applied to horizontal and vertical ventilation, but is most often used for | horizontal ventilation |
when conditions are appropriate, natural horizontal ventilation operations should work with existing atmospheric conditions, taking advantage of | natural air flow |
which mechanical ventilation methods uses higher pressure inside a building to force smoke through opening to the lower pressure area outside? | Positive pressure ventilation |
Positive pressure ventilation is applied to a building at ground level through the use of one or more | Blowers |
Which of the following actions should firefighters do to determine the difference in feel of supported areas of a roof | sound the roof |
roofs that may fail early in a fire and are extremely dangerous to work under roofs supported by | lightweight or engineered trusses |
HVAC equipment in windowless buildings may cause spread of smoke, heat and fire unless specifically | designed for this purpose |
two or more primary feeders should run from the source of the water supply to high risk and industrial districts along separate routes | True |
fire hydrant locations are generally determined by fire personnel | False |
Dry Barrel hydrants are designed to have water inside them at all times. | False |
Isolation and control valves are usually constructed of | Brass |
Which of the following is a hydrant that receives water from only one direction | Dead-End Hydrant |
Standard three way fire hydrants require a ___-inch (mm) valve opening | 5 (125) |
Floating strainers can draft water from sources as shallow as | 24in (600mm) |
Hose size refers to the external diameter of the hose | False |
A hose clamp should be applied approximately 5 ft (1.5m) from the coupling on the supply side. | True |
NFPA 1901 lists the minimum quantity of hose to be carried on a standard pumper or engine | True |
In a forward lay, the first coupling off the hose bed should be male | false |
When advancing hose up and down a stairway, the hose should be uncharged when conditions allow | True |
which type of hose requires the most care in cleaning | Woven jacket hose |
Which of the following items allow the number of hoselines operating on the fire ground to be increased or decreased | Valve Devices |
Which of the following statements is an advantage of the accordion load? | Firefighters can easily pick up a number of folds and place on one shoulder to carry hose from bed |
Which preconnected hose load is designed to be pulled by one person and must be completely removed from the bed before deploying the nozzle end | Triple Layer load |
Which type of hose lay is the most expedient if the apparatus must stay at the water source | Reverse Lay |
When deploying preconnected hoselines, which load should result in the hoseline deploying with fewer kinks and bends | Minuteman Load |
The primary way water extinguishes fire is by excluding oxygen from the fuel | False |
to prevent water hammer, valves, nozzles and hydrants should be closed slowly | True |
Rotary control valves control both the water flow and the discharge pattern of a fire stream | True |
Nozzles should be stored with the control valve bale in the open position | False |
The energy required to change a liquid into a vapor is | Latent heat of vaporization |
which of the following statements about fire streams is most accurate? | Water broken into small droplets absorbs heat more rapidly |
Friction loss may be overcome by | adding additional parallel hoselines |
which of the following fire streams is upplied by 1.5 and 3in (38mm to 77mm) hose, and discharges from 40 to 350 gpm | Handline stream |
Which of the following fire stream patterns has the ability to reach areas other streams might not reach | Straight Stream |
Which of the following statements about fog streams is most accurate | Fog streams may be used to cool the hot fire gas layer |
Which type of nozzle can be adjusted, resulting in different patterns | Fog |
Which type of nozzle can be used to effectively control fires in concealed spaces | Piercing |
The type of nozzle control valve that seats a movable cylinder against a shaped cone to turn off the flow of water is the: | slide valve |
When operating a handline, a firefighter should open the control valve slowly to | better control nozzle reaction |
The philosophy of loss control describes activities performed before, during, and after a fire incident to minimize losses to property | True |
Allowing carbon and ash stains to dry on canvas salvage covers may cause the canvas to rot | True |
Synthetic salvage covers require as much maintenance as canvas covers | false |
Overhaul procedures typically begin in the area of least severe fire involvement | False |
The only way to ensure fires are extinguished in baled items such as rags, cotton or hay is to break them apart | True |
Large smoldering items should be left inside the fire incident structure for thorough extinguishment | false |
which of the following best describes the results of forcible entry, ventilation, and fire extinguishment operations during loss control? | Secondary damage |
which of the following best describes the results of forcible entry, ventilation, and fire extinguishment operations during loss control? | Secondary damage |
Salvage operations may be conducted while suppression activities are underway if the situation permits and | on-scene resources are sufficient |
Which of the following are designed to be driven into walls or wooden framing to provide strong points to hang objects | J-Hooks |
Which of the following is typically the most convenient method used to carry a folded salvage cover for a two-firefighter spread | On the shoulder with open edges next to the next |
SCBA should be worn even if the air after a fire incident appears to be without smoke to protect firefighters from | Toxic combustion products |
Which of the following statements about hoselines during overhaul operations is most accurate | Hoselines should be monitored for leakage, especially at couplings |
Firefighters must be especially aware of checking the attic and basement for fire extension in structures using | balloon construction |
Which type of following construction offers the appearance of Type 3 construction? | Type 5 |
Non Combustible construction as defined by the National Code of Canada achieves fire safety by: | Using noncombustible materials for structural members and other building assemblies. |
What building component supports only its weight and may divide two areas within a structure? | Non-Load Bearing Wall |
What part of a traditional wood-joisted roof tends to lose strength gradually when exposed to fire? | Solid Wood Joist |
A physical change causes a change to both chemically and in appearance | False |
All energy can change from one type to another | True |
In ambient temperatures (about 68 degrees) materials can ignite at oxygen concentrations as low as 14 percent | True |
The incipient stage is when the fire begins to influence the compartment environment. | False |
Which of the following is not actively part of the combustion reaction represented by the fire tetrahedron? | Passive agents |
What is the most common source of heat in combustion reactions? | Chemical energy |
Which of the following best describes how understanding heat transfer can help fire fighters? | It can help estimate the size of the fire before attack |
Sufficient heat during flaming combustion causes fuel and oxygen to form: | free radicals and initiates a reaction |
What fire behavior is the result of an increase in low-level ventilation prior to upper level ventilation? | Backdraft |
Which of the following is the most commonly used fire-suppression method? | Temperature reduction |
Portable fire extinguishers are only classified by the type of extinguishing agent used | False |
Types of portable fire extinguishers are organized by the type of agent and method used to expel contents | True |
Portable fire extinguisher ratings are classified according to the types of fire for which they are intended | True |
Most portable fire extinguishers are operated in very different ways | False |
Maintenance for both fire department and privately owned portable fire extinguishers is based on NFPA 10 | False |
A nozzle tip is too small will not deliver the volume of water required to extinguish the fire | True |
Elevators must not be used to transport fire crews to the fire floor | True |
Fires in electrical transformers are extremely rare | False |
The goal at a fire involving stacked and piled materials is to confine the fire to the pile or building of origin | True |
Standard structural turnout is appropriate for fighting ground cover fires | False |
What strategy is typically selected when property is not salvageable | Defensive |
What type of fire attack produces large quantities of steam and must be coordinated with ventiliation | Indirect |
Which of the following is a form of exterior exposure protection? | Apply a protective spray of water or foam between the fire and exposures |
When should water flow from a sprinkler be stopped | Once the fire has been brought under control |
Class D fires: | Are reactive to water |
A vehicle should be attacked from a ___ Angle | 45 Degree |
What type of ground cover fire is most common type and consumes low-lying grass, shrubs, and other vegetation? | Surface fire |
Ground cover fires are dangerous because which two elements of the fire triangle are always present? | Oxygen and fuel |
Which part of a ground cover fire are the sides, roughly parallel to the main direction of fire spread? | Flanks |
Which method used to attack ground cover fires is generally used against fires that are very hot, very big, and very fast? | Indirect |
When conducting a search after a structure fire, start inside the burned portion of the structure | False |
The area of origin may display unburned materials | True |
Searching for the area of origin and cause of a structure fire is similar to vehicle fires? | True |
The perimeter for explosions should be established at two times the distance from farthest piece of debris found. | False |
Overhaul operations can be detrimental to the fire investigation | True |
The general location where a fire began is called the: | Area of origin |
Which of the following typically stores materials, debris, trash and rubbish | Exterior Fires |
Which of the following is a fire cause classification that may refer to a situation in which each component of the ignition sequence is not specifically identified? | Undetermined |
Ovens, cook tops, and electrical appliances are all examples of? | Ignition sources |
Which of the following may indicate use of accelerants of intentionally disconnected gas lines? | Heat intensity |
Which of the following is a responsibility of all fire officers and fire fighters at a fire scene? | Preserving evidence |
One of the goals of a fire and life safety initiatives program is to encourage and empower civilians to act in a safe manner to reduce the potential fore fires, accidents, and injuries | True |
A fire fighter must be able to answer questions on fire and life safety topics not traditionally covered under the title of fire prevention? | True |
Company level preincident surveys are generally conducted on occupied private residences | False |
Codes are only enforceable when the suthority having jurisdiction adopts them | true |
Which fire and life safety program component includes investigating the cause of fires, documenting results, and providing law enforcement agencies with findings? | Enforcement |
Three categories of hazards that can benefit from the fire and life safety education are unsafe behaviors, unsafe conditions and | Hazardous processes |
Which fire and life safety audience should be positively informed what to do rather than being focused on what not to do? | Pre School Children |
Which of the following topics is most appropriate for high school students? | Safe driving habits |
Which of the following is one step a firefighter 1 can take to help locate children at risk of becoming juvenile firesetters? | Include juvenile firesetter information in presentations and fire station tours |
What is the term for a set of requirements similar to a standard, developed by a consensus group, and used as a starting point for the code adoption process? | model code |
Quer criar seus próprios Flashcards gratuitos com GoConqr? Saiba mais.