Questão 1
Questão
What is the device used to link different frequencies together at a specific location?
Responda
-
Gateway
-
Transponder
-
Relay
-
Resonator
Questão 2
Questão
Which radio frequency band operates on 150 MHz to 174 MHz?
Questão 3
Questão
What does NFIRS offer as a benefit to firefighters?
Responda
-
Determining trends in firefighter casualties
-
Reporting arsonists country wide
-
Reporting number of firefighters used on an incident scene
-
Determining the number of firefighters to use on an incident scene
Questão 4
Questão
What is one of the most extensive reports completed by a fire department after a major incident which resulted death(s) or major property damage?
Responda
-
After-action report
-
Post-action report
-
After-response report
-
Post-fire report
Questão 5
Questão
Which fire alarm reporting system is used in commercial buildings, multifamily dwellings, and private homes and could consist of smoke detectors, manual pull boxes, and water flow alarms?
Responda
-
Private fire alarm
-
Public answering point
-
Still alarm
-
Municipal fire alarm
Questão 6
Questão
Which of the following alarm reporting systems originated in the 1800s in widely urbanized areas?
Responda
-
Municipal fire alarm
-
Private fire alarm
-
Land-line
-
Still alarm
Questão 7
Questão
Which of the following is an improvement to 9-1-1?
Questão 8
Questão
Per SOP 205.01, a progress report includes:
Responda
-
Position (location), Progress, needs.
-
Position (location), Progress, Accountability.
-
Position (location), Assignment, Progress
-
Assignment, Progress, Accountability.
Questão 9
Questão
Documenting the event is part of the communications process.
Questão 10
Questão
The preferred method of communications on a radio system is ________________.
Questão 11
Questão
What items must be communicated initially when transmitting a Mayday (prior to acknowledgement from Command)?
Responda
-
Mayday, Identifier, Location.
-
Mayday, Identifier, Situation, Location.
-
Mayday, Identifier, Situation, Location, Plan.
-
Mayday, Identifier, Situation.
Questão 12
Questão
What term is used to clear all non-essential communications on the fireground for urgent communications?
Responda
-
Emergency Traffic
-
Mayday
-
Tone alert
-
Shut up so I can talk
Questão 13
Questão
What term is used to have fire personnel evacuate a structure in rapid retreat, utilizing the closest egress without tools and equipment (except hand tools)?
Responda
-
Abandon
-
Evacuate
-
Withdraw
-
Emergency Traffic
-
Run for your lives
Questão 14
Questão
Which term is used on an emergency scene and indicates that you are ready for a new assignment?
Responda
-
Available
-
In service
-
Task complete
-
Good to go
Questão 15
Questão
The ability of emergency responders to work seamlessly with other systems or products without any special effort is the definition of ______________.
Responda
-
Interoperability
-
Cross training
-
Automation
-
Integration
Questão 16
Questão
What are the two functions of radios?
Responda
-
Transmit and receive
-
Code and encode
-
Relay and receive
-
Passive and active
Questão 17
Questão
What are the two types of technology for the method of transmitting the conversation through signals over the airwaves?
Responda
-
Analog and digital
-
Active and Passive
-
UHF and VHF
-
MHz and GHz
Questão 18
Questão
What determines the number of units dispatched to an incident?
Responda
-
Departmental policy
-
Dispatcher
-
Manpower available
-
Units available
Questão 19
Questão
What does the acronym NFIRS refer to?
Responda
-
National Fire Incident Reporting System
-
National Firefighters Improved Response System
-
National Firefighter Incident Response System
-
National Firefighting Integrated Reporting System
Questão 20
Questão
What is the primary purpose of the public fire service communication system?
Responda
-
Receive report of emergency and dispatch units
-
Announce vehicle as being in service
-
Announce vehicle as being out of service
-
Receive telephone calls
Questão 21
Questão
What is the term for an item used to describe the physical location of an alarm box and the apparatus or resources assigned to respond?
Responda
-
Box card
-
Apparatus card
-
Response card
-
Trip card
Questão 22
Questão
What technology can be used to receive transmissions from field units and rebroadcast them at a higher power?
Responda
-
Repeater
-
Transceiver
-
Booster
-
Transponder
Questão 23
Questão
What type of system utilizes a computer to assist in dispatching units?
Responda
-
Computer aided dispatch
-
Computerized run card
-
Computerized box card
-
Computer based dispatch
Questão 24
Questão
Which radio frequency band is becoming available to public safety entities as television stations move to other frequencies?
Responda
-
700 MHz
-
600 MHz
-
300 MHz
-
200 MHz
Questão 25
Questão
Which radio system does the user select a talk group and the system automatically selects the channel to be used?
Responda
-
Trunked
-
Active
-
Conventional
-
Passive
Questão 26
Questão
Which radio system does the user select the channel to communicate?
Responda
-
Conventional
-
Active
-
Trunked
-
Passive
Questão 27
Questão
Which type of channel set-up is one frequency used for transmitting and a second frequency is used for receiving?
Responda
-
Duplex
-
Coded
-
Simplex
-
Multiplex
Questão 28
Questão
Which type of channel set-up is one frequency used for both transmitting and receiving signals?
Responda
-
Simplex
-
Coded
-
Duplex
-
Multiplex
Questão 29
Questão
Which radio frequency band operates on 33 MHz to 46 MHz?
Questão 30
Questão
Which radio frequency band operates on 450 MHz to 460 MHz?
Questão 31
Questão
A "live saw" means that the saw is_________.
Responda
-
Running
-
Turned on but not started
-
In service on the apparatus
-
In the hands of a firefighter
Questão 32
Questão
A multipurpose fire service specific tool made from a single piece of forged steel is called ________________?
Responda
-
Halligan Bar
-
Hooligan Bar
-
Huxbar
-
Hoober bar
Questão 33
Questão
A pickhead axe has how many cutting bits?
Questão 34
Questão
A reciprocating saw blade that is labeled bimetal means that it can cut ____________.
Responda
-
A - Wood
-
B - Metal
-
Both a and b
-
Neither a or b
Questão 35
Questão
Allow ________________ to do the work when using an axe.
Responda
-
The weight of the axe
-
Your body weight
-
Your back and shoulders
-
Inertia and gravity
Questão 36
Questão
An important rule to remember when using a power saw is to cut as deep as the blade can possibly cut, as it will have no effect on any structural members.
Questão 37
Questão
At a minimum ________________ should be used at all times when working with hand tools.
Responda
-
Eye protection
-
Helmets
-
Gloves
-
Turnout gear
Questão 38
Questão
By watching the discharge from the chainsaw, a firefighter can determine the condition of the chain. If the chain is _________, then the firefighter will see dust and will have to apply a lot of pressure to make the cut.
Responda
-
Dull
-
Sharp
-
Bent
-
Missing teeth
Questão 39
Questão
Common terms for a _____________ saw are cutoff saw, demolition saw, or rescue saw.
Responda
-
Rotary
-
Chain
-
Reciprocating
-
None of these
Questão 40
Questão
Cutting with an axe is as much ________________ as it is strength.
Responda
-
Hand-eye coordination
-
Control and command
-
Stability and swing
-
Precision and accuracy
Questão 41
Questão
Cutting, striking, pushing, pulling, and prying are all examples of ________________?
Responda
-
Various tasks tools can accomplish on the fire ground.
-
types of tools used on the fire ground.
-
Methods tools use to accomplish work on the fire ground.
-
Methods and ways tools are used on the fire ground.
Questão 42
Questão
Effectively used, tools become ________________ of/to a firefighter’s body.
Responda
-
Extensions
-
Adjuncts
-
Multipliers
-
Hindrances
Questão 43
Questão
Match the following common nonverbal signal used by firefighters with its appropriate meaning: Stop the cut
Questão 44
Questão
Match the following common nonverbal signal used by firefighters with its appropriate meaning: Cut
Questão 45
Questão
Match the following common nonverbal signal used by firefighters with its appropriate meaning: Shut down the saw
Questão 46
Questão
Match the following type of rotary saw blade with the appropriate materials to be cut by it: Aluminum oxide abrasive blades (discs)
Responda
-
Heavy gauge metals
-
Steel, concrete, and wood
-
Concrete, brick, mortar, etc.
-
Lexan, Plexiglas, light gauge metal
Questão 47
Questão
Match the following type of rotary saw blade with the appropriate materials to be cut by it: Diamond grit blade
Responda
-
Steel, concrete, and wood
-
Heavy gauge metals
-
Concrete, brick, mortar, etc.
-
Lexan, Plexiglas, light gauge metal
Questão 48
Questão
Match the following type of rotary saw blade with the appropriate materials to be cut by it: Silicon carbide blade
Responda
-
Concrete, brick, mortar, etc.
-
Heavy gauge metals
-
Steel, concrete and wood
-
Lexan, Plexiglas, light gauge metal
Questão 49
Questão
Match the following type of rotary saw blade with the appropriate materials to be cut by it: Carbine tip blades
Responda
-
Lexan, Plexiglass, light gauge metal
-
Heavy gauge metals
-
Steel, concrete, and wood
-
Concrete, brick, mortar, etc.
Questão 50
Questão
Most rotary saws and chain saws operate with a ____________ engine.
Responda
-
Two-cycle
-
Four-cycle
-
Electrical
-
Diesel
Questão 51
Questão
Not all bolt cutters can cut ________________.
Responda
-
Case-hardened steel
-
Chain link fence
-
Small cables
-
Tree limbs
Questão 52
Questão
Once a reciprocating saw is used, a new blade should be placed in the saw to make it ready for the next emergency, no matter what condition it is in.
Questão 53
Questão
Reciprocating saws are generally used by firefighters for ______________.
Questão 54
Questão
Saw maintenance is best achieved by following the manufacturer's instructions.
Questão 55
Questão
Spreading your feet will help to ________________.
Questão 56
Questão
The ideal weight for a pickhead axe is ________________?
Responda
-
8 pounds
-
6 pounds
-
7 pounds
-
9 pounds
Questão 57
Questão
The key to using an axe effectively is ________________.
Responda
-
Accuracy
-
Timing
-
Precision
-
Strength
Questão 58
Questão
The most important safety factor a saw operator must observe after cutting with a rotary saw is_____________.
Questão 59
Questão
The primary role of the axe is to ________________.
Questão 60
Questão
The recommended minimum distance that firefighters should maintain between themselves and another firefighter operating a saw is ________________________.
Responda
-
10 feet
-
5 feet
-
6 feet
-
15 feet
Questão 61
Questão
The simple saw starting method developed by Lieutenant Michael Ciampo (FDNY) is safer because it allows the firefighter to lift the saw using his legs and back muscles together, reducing the chance of an injury.
Questão 62
Questão
Using a chain saw to cut a ventilation hole in a roof is the same as using a chain saw to cut trees.
Questão 63
Questão
What fire service tool can be used to secure a monitor by driving the tool into the ground and securing the monitor to the tool?
Responda
-
Pry bar
-
Flat-head axe
-
Halligan tool
-
Pick-head axe
Questão 64
Questão
When starting a cold engine on a rotary saw, the best practice is to pull the starter cord as quickly as possible and as far as it will travel.
Questão 65
Questão
When swinging an axe concentrate on ________________.
Responda
-
Accuracy
-
Force
-
Precision
-
Depth
Questão 66
Questão
When using a chain saw to cut a ventilation hole, a firefighter should use the ___________ of the chain.
Questão 67
Questão
When using a chain saw to ventilate a roof, you should______________.
Responda
-
All of these
-
Bring the saw to full RPMs before you plunge into the material
-
Plunge the saw only a few inches into the material
-
Hold the saw in an almost vertical position.