Question 1
Question
What is the device used to link different frequencies together at a specific location?
Answer
-
Gateway
-
Transponder
-
Relay
-
Resonator
Question 2
Question
Which radio frequency band operates on 150 MHz to 174 MHz?
Question 3
Question
What does NFIRS offer as a benefit to firefighters?
Answer
-
Determining trends in firefighter casualties
-
Reporting arsonists country wide
-
Reporting number of firefighters used on an incident scene
-
Determining the number of firefighters to use on an incident scene
Question 4
Question
What is one of the most extensive reports completed by a fire department after a major incident which resulted death(s) or major property damage?
Answer
-
After-action report
-
Post-action report
-
After-response report
-
Post-fire report
Question 5
Question
Which fire alarm reporting system is used in commercial buildings, multifamily dwellings, and private homes and could consist of smoke detectors, manual pull boxes, and water flow alarms?
Answer
-
Private fire alarm
-
Public answering point
-
Still alarm
-
Municipal fire alarm
Question 6
Question
Which of the following alarm reporting systems originated in the 1800s in widely urbanized areas?
Answer
-
Municipal fire alarm
-
Private fire alarm
-
Land-line
-
Still alarm
Question 7
Question
Which of the following is an improvement to 9-1-1?
Question 8
Question
Per SOP 205.01, a progress report includes:
Answer
-
Position (location), Progress, needs.
-
Position (location), Progress, Accountability.
-
Position (location), Assignment, Progress
-
Assignment, Progress, Accountability.
Question 9
Question
Documenting the event is part of the communications process.
Question 10
Question
The preferred method of communications on a radio system is ________________.
Question 11
Question
What items must be communicated initially when transmitting a Mayday (prior to acknowledgement from Command)?
Answer
-
Mayday, Identifier, Location.
-
Mayday, Identifier, Situation, Location.
-
Mayday, Identifier, Situation, Location, Plan.
-
Mayday, Identifier, Situation.
Question 12
Question
What term is used to clear all non-essential communications on the fireground for urgent communications?
Answer
-
Emergency Traffic
-
Mayday
-
Tone alert
-
Shut up so I can talk
Question 13
Question
What term is used to have fire personnel evacuate a structure in rapid retreat, utilizing the closest egress without tools and equipment (except hand tools)?
Answer
-
Abandon
-
Evacuate
-
Withdraw
-
Emergency Traffic
-
Run for your lives
Question 14
Question
Which term is used on an emergency scene and indicates that you are ready for a new assignment?
Answer
-
Available
-
In service
-
Task complete
-
Good to go
Question 15
Question
The ability of emergency responders to work seamlessly with other systems or products without any special effort is the definition of ______________.
Answer
-
Interoperability
-
Cross training
-
Automation
-
Integration
Question 16
Question
What are the two functions of radios?
Answer
-
Transmit and receive
-
Code and encode
-
Relay and receive
-
Passive and active
Question 17
Question
What are the two types of technology for the method of transmitting the conversation through signals over the airwaves?
Answer
-
Analog and digital
-
Active and Passive
-
UHF and VHF
-
MHz and GHz
Question 18
Question
What determines the number of units dispatched to an incident?
Answer
-
Departmental policy
-
Dispatcher
-
Manpower available
-
Units available
Question 19
Question
What does the acronym NFIRS refer to?
Answer
-
National Fire Incident Reporting System
-
National Firefighters Improved Response System
-
National Firefighter Incident Response System
-
National Firefighting Integrated Reporting System
Question 20
Question
What is the primary purpose of the public fire service communication system?
Answer
-
Receive report of emergency and dispatch units
-
Announce vehicle as being in service
-
Announce vehicle as being out of service
-
Receive telephone calls
Question 21
Question
What is the term for an item used to describe the physical location of an alarm box and the apparatus or resources assigned to respond?
Answer
-
Box card
-
Apparatus card
-
Response card
-
Trip card
Question 22
Question
What technology can be used to receive transmissions from field units and rebroadcast them at a higher power?
Answer
-
Repeater
-
Transceiver
-
Booster
-
Transponder
Question 23
Question
What type of system utilizes a computer to assist in dispatching units?
Answer
-
Computer aided dispatch
-
Computerized run card
-
Computerized box card
-
Computer based dispatch
Question 24
Question
Which radio frequency band is becoming available to public safety entities as television stations move to other frequencies?
Answer
-
700 MHz
-
600 MHz
-
300 MHz
-
200 MHz
Question 25
Question
Which radio system does the user select a talk group and the system automatically selects the channel to be used?
Answer
-
Trunked
-
Active
-
Conventional
-
Passive
Question 26
Question
Which radio system does the user select the channel to communicate?
Answer
-
Conventional
-
Active
-
Trunked
-
Passive
Question 27
Question
Which type of channel set-up is one frequency used for transmitting and a second frequency is used for receiving?
Answer
-
Duplex
-
Coded
-
Simplex
-
Multiplex
Question 28
Question
Which type of channel set-up is one frequency used for both transmitting and receiving signals?
Answer
-
Simplex
-
Coded
-
Duplex
-
Multiplex
Question 29
Question
Which radio frequency band operates on 33 MHz to 46 MHz?
Question 30
Question
Which radio frequency band operates on 450 MHz to 460 MHz?
Question 31
Question
A "live saw" means that the saw is_________.
Answer
-
Running
-
Turned on but not started
-
In service on the apparatus
-
In the hands of a firefighter
Question 32
Question
A multipurpose fire service specific tool made from a single piece of forged steel is called ________________?
Answer
-
Halligan Bar
-
Hooligan Bar
-
Huxbar
-
Hoober bar
Question 33
Question
A pickhead axe has how many cutting bits?
Question 34
Question
A reciprocating saw blade that is labeled bimetal means that it can cut ____________.
Answer
-
A - Wood
-
B - Metal
-
Both a and b
-
Neither a or b
Question 35
Question
Allow ________________ to do the work when using an axe.
Answer
-
The weight of the axe
-
Your body weight
-
Your back and shoulders
-
Inertia and gravity
Question 36
Question
An important rule to remember when using a power saw is to cut as deep as the blade can possibly cut, as it will have no effect on any structural members.
Question 37
Question
At a minimum ________________ should be used at all times when working with hand tools.
Answer
-
Eye protection
-
Helmets
-
Gloves
-
Turnout gear
Question 38
Question
By watching the discharge from the chainsaw, a firefighter can determine the condition of the chain. If the chain is _________, then the firefighter will see dust and will have to apply a lot of pressure to make the cut.
Answer
-
Dull
-
Sharp
-
Bent
-
Missing teeth
Question 39
Question
Common terms for a _____________ saw are cutoff saw, demolition saw, or rescue saw.
Answer
-
Rotary
-
Chain
-
Reciprocating
-
None of these
Question 40
Question
Cutting with an axe is as much ________________ as it is strength.
Answer
-
Hand-eye coordination
-
Control and command
-
Stability and swing
-
Precision and accuracy
Question 41
Question
Cutting, striking, pushing, pulling, and prying are all examples of ________________?
Answer
-
Various tasks tools can accomplish on the fire ground.
-
types of tools used on the fire ground.
-
Methods tools use to accomplish work on the fire ground.
-
Methods and ways tools are used on the fire ground.
Question 42
Question
Effectively used, tools become ________________ of/to a firefighter’s body.
Answer
-
Extensions
-
Adjuncts
-
Multipliers
-
Hindrances
Question 43
Question
Match the following common nonverbal signal used by firefighters with its appropriate meaning: Stop the cut
Question 44
Question
Match the following common nonverbal signal used by firefighters with its appropriate meaning: Cut
Question 45
Question
Match the following common nonverbal signal used by firefighters with its appropriate meaning: Shut down the saw
Question 46
Question
Match the following type of rotary saw blade with the appropriate materials to be cut by it: Aluminum oxide abrasive blades (discs)
Answer
-
Heavy gauge metals
-
Steel, concrete, and wood
-
Concrete, brick, mortar, etc.
-
Lexan, Plexiglas, light gauge metal
Question 47
Question
Match the following type of rotary saw blade with the appropriate materials to be cut by it: Diamond grit blade
Answer
-
Steel, concrete, and wood
-
Heavy gauge metals
-
Concrete, brick, mortar, etc.
-
Lexan, Plexiglas, light gauge metal
Question 48
Question
Match the following type of rotary saw blade with the appropriate materials to be cut by it: Silicon carbide blade
Answer
-
Concrete, brick, mortar, etc.
-
Heavy gauge metals
-
Steel, concrete and wood
-
Lexan, Plexiglas, light gauge metal
Question 49
Question
Match the following type of rotary saw blade with the appropriate materials to be cut by it: Carbine tip blades
Answer
-
Lexan, Plexiglass, light gauge metal
-
Heavy gauge metals
-
Steel, concrete, and wood
-
Concrete, brick, mortar, etc.
Question 50
Question
Most rotary saws and chain saws operate with a ____________ engine.
Answer
-
Two-cycle
-
Four-cycle
-
Electrical
-
Diesel
Question 51
Question
Not all bolt cutters can cut ________________.
Answer
-
Case-hardened steel
-
Chain link fence
-
Small cables
-
Tree limbs
Question 52
Question
Once a reciprocating saw is used, a new blade should be placed in the saw to make it ready for the next emergency, no matter what condition it is in.
Question 53
Question
Reciprocating saws are generally used by firefighters for ______________.
Question 54
Question
Saw maintenance is best achieved by following the manufacturer's instructions.
Question 55
Question
Spreading your feet will help to ________________.
Question 56
Question
The ideal weight for a pickhead axe is ________________?
Answer
-
8 pounds
-
6 pounds
-
7 pounds
-
9 pounds
Question 57
Question
The key to using an axe effectively is ________________.
Answer
-
Accuracy
-
Timing
-
Precision
-
Strength
Question 58
Question
The most important safety factor a saw operator must observe after cutting with a rotary saw is_____________.
Question 59
Question
The primary role of the axe is to ________________.
Question 60
Question
The recommended minimum distance that firefighters should maintain between themselves and another firefighter operating a saw is ________________________.
Answer
-
10 feet
-
5 feet
-
6 feet
-
15 feet
Question 61
Question
The simple saw starting method developed by Lieutenant Michael Ciampo (FDNY) is safer because it allows the firefighter to lift the saw using his legs and back muscles together, reducing the chance of an injury.
Question 62
Question
Using a chain saw to cut a ventilation hole in a roof is the same as using a chain saw to cut trees.
Question 63
Question
What fire service tool can be used to secure a monitor by driving the tool into the ground and securing the monitor to the tool?
Answer
-
Pry bar
-
Flat-head axe
-
Halligan tool
-
Pick-head axe
Question 64
Question
When starting a cold engine on a rotary saw, the best practice is to pull the starter cord as quickly as possible and as far as it will travel.
Question 65
Question
When swinging an axe concentrate on ________________.
Answer
-
Accuracy
-
Force
-
Precision
-
Depth
Question 66
Question
When using a chain saw to cut a ventilation hole, a firefighter should use the ___________ of the chain.
Question 67
Question
When using a chain saw to ventilate a roof, you should______________.
Answer
-
All of these
-
Bring the saw to full RPMs before you plunge into the material
-
Plunge the saw only a few inches into the material
-
Hold the saw in an almost vertical position.